#
# ChangeLog for cncfraese
#
# Generated by Trac 1.2.3
# May 17, 2024, 1:55:15 AM

Sat, 30 May 2015 12:15:26 GMT Norbert Wigbels <norbert.wigbels@…> [12b1db6]
	* cncfraese/projects/Zyklonabscheider/deckelverstaerkung_zyklon.dxf (moved)

	Deckelverstaerkung f. Zyklonabscheider


Thu, 28 May 2015 18:46:40 GMT Norbert Wigbels <njw@…> [df92c80]
	* cncfraese/config/3040t.stepconf (modified)

	Finale Steigung


Wed, 27 May 2015 18:47:55 GMT Norbert Wigbels <njw@…> [d15de88]
	* cncfraese/config/3040t.stepconf (modified)

	Spindelsteigung korrigiert fuer x und y


Mon, 25 May 2015 06:52:03 GMT Norbert Wigbels <njw@…> [b3af1d0]
	* cncfraese/config/3040t.stepconf (modified)

	Config Zwischenstand


Wed, 13 May 2015 12:29:07 GMT Norbert Wigbels <norbert.wigbels@…> [b41413a]
	* cncfraese/projects/F3K_Ruderhoerner/elevetor_rudder_control_horn.dxf (modified)
	* cncfraese/projects/Zyklonabscheider/deckel_konstruktion.dxf (added)
	* cncfraese/projects/Zyklonabscheider/deckel_konstruktion.dxf~ (added)

	Neues Ruderhorn


Sat, 09 May 2015 20:49:14 GMT Norbert Wigbels <norbert.wigbels@…> [9bcd8f9]
	* cncfraese/projects/F3K_Ruderhoerner/#elevetor_rudder_control_horn.dxf (deleted)
	* cncfraese/projects/F3K_Ruderhoerner/elevetor_rudder_control_horn.dxf (modified)
	* cncfraese/projects/F3K_Ruderhoerner/elevetor_rudder_control_horn.dxf~ (deleted)

	Probefraesen


Sun, 03 May 2015 22:17:21 GMT Norbert Wigbels <norbert.wigbels@…> [60b92db]
	* cncfraese/projects/F3K_Ruderhoerner/#elevetor_rudder_control_horn.dxf (added)
	* cncfraese/projects/F3K_Ruderhoerner/elevetor_rudder_control_horn.dxf (added)
	* cncfraese/projects/F3K_Ruderhoerner/elevetor_rudder_control_horn.dxf~ (added)

	Intial Import of HT22 Airfoil


Sun, 03 May 2015 11:13:42 GMT Norbert Wigbels <norbert.wigbels@…> [602c1d3]
	* cncfraese/projects/steckbrett_fraeser.dxf (added)

	Steckbrett Fraeser


Sun, 03 May 2015 10:51:30 GMT Norbert Wigbels <njw@…> [86bb187]
	* cncfraese/config/testX.ngc (added)
	* cncfraese/config/testY.ngc (added)
	* cncfraese/config/testZ.ngc (added)

	Schrittverlusttests fuer alle Achsen


Sun, 03 May 2015 09:12:45 GMT Norbert Wigbels <norbert.wigbels@…> [51b7b28]
	* cncfraese/projects/F3K_Wurfstift/throwing_peg.dxf (added)
	* cncfraese/projects/F3K_Wurfstift/throwing_peg.dxf~ (added)

	Wurfstifte nach Marc Drela


Sun, 03 May 2015 07:34:02 GMT Norbert Wigbels <norbert.wigbels@…> [d94f363]
	* cncfraese/projects/norbert_wigbels.dxf (added)

	Norbert Wigbels Gravur


Sat, 02 May 2015 08:36:45 GMT Norbert Wigbels <njw@…> [e9f5e39]
	* cncfraese/config/3040t.stepconf (modified)

	ESTOP konfiguriert


Fri, 01 May 2015 19:11:05 GMT Norbert Wigbels <njw@…> [0f6d75f]
	* cncfraese/config/3040t.stepconf (added)

	Initial configuration for LinuxCNC


Fri, 01 May 2015 07:11:21 GMT Norbert Wigbels <norbert.wigbels@…> [cf9f2dc]
	* cncfraese/3040t/user manual 3040.pdf (added)

	Neues Hobby